Need help?Do you have a question about the anago KST Series and is the answer not in the manual?
Company overview, history, and specialization in sharpness testing technology.
Recommended safety precautions, including wearing protective gloves when handling blades.
Step-by-step guide for installing the AnagoSharp software on a PC or laptop.
Information on the Anago Sharpness Test Media and procedures for loading and removing it.
Instructions for connecting the KST to a computer using USB cables for data transfer.
Explanation of PC-Control and Local (Manual) modes and how to switch between them.
Process for calibrating the KST, including load cell calibration and setting up.
How to define top and bottom limits for blade testing based on blade length.
Covers saving tests, running multiple tests, setting score cut-offs, and pausing/stopping tests.
Details the purpose and usage of each button on the KST keypad for control.
Procedures for securely clamping the blade and aligning it for accurate testing.
Step-by-step instructions for performing sharpness tests with or without a PC.
Explanation of terms like Anago Score, Cutting Force, and how to view results in PC mode.
How the LCD display and LED array show results when not connected to a PC.
Guide on how to access, filter, and select previously recorded test results.
Instructions on how to modify saved test data, including custom fields and tip settings.
Procedures for backing up, restoring, and importing test data files.
Recommended maintenance schedule, including calibration and lubrication.
Steps to resolve common problems like calibration errors or clamp issues.
Information on ordering spare parts and a diagram of machine components.
How to obtain and apply firmware and software updates for the KST.
Identification of key machine components and their locations.
Technical specifications for KST 200e and KST 300e models, including voltage, dimensions, and weight.
General| Model | KST Series |
|---|---|
| Category | Test Equipment |
| Type | Signal Generator |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Weight | 4.5 kg |
| Interface | USB, GPIB |
To Next Page