V1.0 Dec.2023analogue.co 4 / 11
Getting Started
Connect the power supply to the USB-C cable and
the USB-C cable to Duo. Plug the power supply
into a standard AC outlet. A dedicated SD card is
required for game saves and full OS features.
Duo has two USB ports, which can connect and
charge controllers as well as a miniDIN connector
supporting original controllers and devices. Duo can
connect with up to four Bluetooth controllers, two
8BitDo 2.4G controllers or two USB controllers. Up
to four controllers can be connected simultaneously
using any combination of connections. A fth
controller can be connected via the miniDIN or by
using an original Multitap device.
When rst using Duo it will automatically search
for a wireless controller to pair with indicated by a
ashing white controller LED. Once a controller is
paired or connected you can remotely power on
Duo without having to press the Duo power button
by simply powering on the controller (typically with
the Start or Home button).
Use the included USB-C cable and Power Supply
Caution: Do not insert DVD, Blu-ray or damaged
discs into Duo. These are not supported and may
cause undesired behavior.
Upgrading Duo OS and Firmware
Update Duo OS by visiting
analogue.co/support/duo to get the most recent
release. You will see an update bar on your display
during the two stage update process. If the update
is interrupted, restart by powering o and powering
on Duo.
Power LED Status
— LED Solid White Power is On
— LED Blinking White CD Ejecting
— LED Breathing White CD Reading
— LED Solid Purple System Sleep
— LED Flashing Yellow Updating OS
Controller LED Status
— LED Blinking White Pairing Ready
— LED Solid White Connected
Ports and Indicators
Power Button
Press to power on or wake Duo. Hold for 2 seconds
to power o Duo.
Eject Button
Press to eject the CD.
Pairing Button
Press to pair a wireless controller.
Controller LEDs
Indicate whether Player 1 - 4 is connected or
pairing with Duo. There is no indication for original
controllers connected via the miniDIN.
HDMI Port
Output video and audio from Analogue Duo
to your display or receiver.
USB Ports x 2
Connect directly or charge your controllers.
Power Port
Insert the USB-C Cable and connect it to the
USB-C Power Supply to power Duo.
SD Card Slot
Used for updating Duo, game saves, Memories and
Library support (up to 1TB).
Headphone Jack
Connect headphones or external speakers via the
3.5mm stereo output jack.
Volume Wheel
Rotate to adjust the volume level for the headphone
jack.
To Next Page
Loading...