Analogue Mega Sg - Page 8

analogue.co 8 / 23V1.1 March 2019
Settings Menu Structure & Outline
Factory Default Settings for each option are highlighted. If the option is not
highlighted, then it is not enabled with the Factory Default Settings. If there
is a range given to a particular option, then the default value for that range is
highlighted after the range limits are given.
A Video
1 Resolution
a 480p60
b 720p60
c 1080p60 (assuming your display
supports this resolution)
d 480p50
e. 720p50
f. 1080p50
2 Width & Height (when Advanced
Mode is enabled, otherwise Screen
Size)
a x320 width (depends on resolution,
1337 for 1080p)
b Horizontal Position (depends on
resolution, 38 for 1080p)
c Height (depends on resolution,
1080 for 1080p)
d Vertical Position (depends on
resolution, 50 for 1080p)
f Link x320 and x256 sliders
3 Screen Size (when Advanced Mode
is disabled)
a 1:1
b Square Pixels
c 4:3 for 16:9
d 4:3 for 16:10
e 4x Height (1080p only)
f 4.5x Height (1080p only)
g 5x Height (1080p only)
4 Scalers
a No Scaler
b HQ2x
c HQ3x
d HQ4x
e Scale 2x
f Scale 3x
g X-Ray
h Disable H Interpolation
i Disable V Interpolation
5 Scanlines
a No Scanlines
b Normal Scanlines
c Hybrid Scanlines
d Scanline Depth (0-255, 120)
6 Extra Features
a Mask Top and Bottom Borders
b Mask Left and Right Borders
c Enable Dither Blending
b Dither Blending Depth (0-63, 0)
7 Buer Mode (not shown unless
Advanced Mode is enabled)
a Fully Buered
b Zero Delay
c Single Buer
8 Color (not shown unless Advanced
Mode is enabled)
a Limit RGB Range
b Lock Gamma Sliders Together
c Red (1.00-1.99, 1.00)
d Green (1.00-1.99, 1.00)
e Blue (1.00-1.99, 1.00)
9 Advanced Mode
B Audio
1 Headphone Settings
a Headphone Volume (0-50, 32)
b High Impedance Phones
2 Channel Levels
a YM2612 L (28-100, 100)
b YM2612 R (28-100, 100)
c Square 1 (28-100, 55)
d Square 2 (28-100, 55)
e Square 3 (28-100, 55)
f Noise (28-100, 55)
3 Channel Panning
a YM2612 L (-100-100, -84)
b YM2612 R (-100-100, 84)
c Square 1 (-100-100, 0)
d Square 2 (-100-100, 0)
e Square 3 (-100-100, 0)
f Noise (-100-100, 0)
4 -3db Output Cut
5 Enable Cartridge and CD Audio
6 Swap Left & Right
7 Cartridge & CD Audio Volume (0-
255, 25)
8 Use Lowpass Filter
9 Lowpass Filter (100-20000, 20000)
10 Ladder Eect Depth (0-31, 0)
11 YM2612 High Quality Mode
12 YM2612 Waveform (0-31, 0)
C System
1 Menu Options
a Skin
i USA
ii EUR
iii JPN
b Highlight Style
i Solid
ii Swipe
iii Flash
iv Rolling
v Throb
c Highlight Color
i Chlorophyll
ii Quinoline
iii Fast Green
iv Petent Blue V
v Spirulina
vi Brilliant Blue
vii Anthocyanin
viii Indiotine
ix Phloxine
x Carmine
xi Carotene
xii Tartrazine
xiii Titanium Dioxide
xiv Aluminum Oxide
d Font
i Alternate Font
ii Upper Case
iii Mixed Case
iv Lower Case
v User Loaded Font
vi Load Font from SD Card
e Menu Bounce
f Dim Game in Menu
2 Hotkeys
a Reset Hotkey
i Left
ii Right
iii Down
iv Up
v Start
vi A
vii B
viii C
b Menu Hotkey
i Left
ii Right
iii Down
iv Up
v Start
vi A
vii B
viii C
c Disable Hotkeys
d Passthrough Mode
3 Startup Options
a Boot Sequence Delay (1-10, 4)
b Title → Menu
c Title → Cartridges
d Menu Direct
e Cartridge Direct
4 Hardware
a USA (NTSC Export)
b Japan (NTSC Domestic)
c PAL Regions (PAL Export)
d PAL Extra (PAL Domestic)
e Force 3 Button Mode
f SD Card Speed
i Normal Speed
ii Fast
iii Faster
g Debug
i Disable YM2612 Channels
1 0
2 1
3 2
4 3
5 4
6 5
ii Disable PCM Audio
iii Show IRQs
iv Show Display Enable
v Highlight Scanline
1 Scanline Number (0-255, 0)
vi Highlight Pixel
1 Pixel Number (0-359,0)
5 LED Options
a Standby Color
b Center Pixel
c K-Pro Rainbow
d Load Custom Pattern
i File Browser
e Adjust Pattern
i Animate Pattern
ii Animate Speed (0-31, 16)
iii Pattern Position (0-255, 0)
f LED Brightness (0-31, 8)
D About
1 Special Thanks
2 Licensing
E Save/Clear Settings
1 Save Settings
2 Restore Factory Defaults