ANCEL BD310 - Page 28

Ance
6. EVAP System Test
Select the EVAP System Test and press ENTER. The screen displays the
BD310
relevant information about the EVAP system
Diagnostic Me
Read Codes
Erase Codes
I/M Readiness
Data Stream
Freeze Frame
Evap System Test
Vehicle Information
7. Vehicle Information
EVAP System Test
Evaporative
system leak test not
supported
Press UP / DOWN to select [Vehicle Information] and press ENTER. The
screen displays information such as VIN (vehicle identification number),
CID (calibration number D) and CVN (calibration check number) as shown
below (different vehicles display different data):
Diagnostic Menu
Read
Erase Codes
11MReadiness
Data Stream
Freeze Frame
Evap System Test
Vehicle Information
Press EXIT to return to the diagnostic menu.
Vehicle information
Vehicle Identification
Number(VlN):
LCFJD52E76H00B345
Calibration Identifications
(CID):
CIDI 03C906057BP
— OBDIWEOBD+CAN 27