BD310
2. Why can not the scan tool be turned on?
If the scan tool cannot be switched on or otherwise works incorrectly.
Check that the scan tool connector is firmly connected to the vehicle's DLC
Check if the DLC pins are bent or broken Clean the DLC pins if necessary.
Check the vehicle battery to make sure it still has at least 8.0 volts.
3. Why is there an operating error?
In rare cases, the scanner may suddenly crash. If the scan tool freezes, an
exception occurs, or the ECU vehicle responds too slowly to requests
First reset the scan tool, then turn off the ignition and wait for 10 seconds.
Turn the ignition back on and continue the test
4. Why can not I connect the BD310 code reader?
For iOS users: do not connect the Bluetooth device in the phone's system
settings, or it will not be able to connect to the app.
For Android users: Turn on Bluetooth and the ocation switch on the phone
5. what do i need to pay attention to?
a The BD310 code reader works on 12-volt vehicles and some light trucks. It
is not suitable for 24-volt trucks
b The update software only supports Windows 7/8/10/11
c Windows XP and macOS computers do not support upgrades.
Warranty
1) This warranty is limited to the person purchasing ANCEL products.
2) ANCEL products are warranted against defects in materials and
workmanship for a period of one year (12 months) from the date of shipment
to the user
30 OBDIVEOBD+CAN —
To Next Page
Loading...
