SAFETY PRECAUTIONS
To prevent personal injury or damage to vehicles and/or the
scan tool, read this instruction manual first and observe the
following safety precautions at a minimum whenever working on
a vehicle:
Always perform automotive testing in a safe environment.
Do not attempt to operate or observe the tool while driving a
vehicle. Operating or observing the tool will cause driver
distraction and could cause a fatal accident.
Wear safety eye protection that meets ANSI standards
Operate the vehicle in a well ventilated work area: Exhaust
gases are Poisonous
Put the transmission in PARK (for automatic transmission) or
NEUTRAL (for manual transmission) and make sure the parking
brake is engaged
Keep the scan tool dry, clean, free from oil/water or grease. Use
a mild detergent on a clean cloth to clean the outside of the
scan tool, when necessary
ABOUT BM700
1. Coverage
1) BM700 supports for BMW, Mini and Rolls-Royce brand cars.
It works on all the systems such as engine, transmission, ABS
and airbag etc.
2) Supports OBDII/EOBD Modes of operation
2. Product specification
• 2 8" 240x320 pixels LCD screen
• Operating Voltage: 8V-18V
• Operating Temperature: OOC-600C(32-1400F)
• Storage Temperature: -200C-700C(4-1580F)
EN
To Next Page
Loading...
