Move To The Assembly Position
Please Check The Motor Has
Move To The Assembly Position
Now start to disassemble the brake
calipers and replace EPB pads.lf the
brake is not fully retracted, please use
a tool to push it back.
Fully Retracted
0K
ESC 0K ESC
E-pa Replace Brake pads
Move To The Assembly Position
Deactivate Assembly Position
2/2
Deactivate Assembly Position
[ESC] to exit
ESC
Move To The Assembly Position
Press [0K] TO Deactivate Assembly
Deactivate Assembly Position
Please check that the brake caliper
has been installed,
Otherwise the execution Of this
function may cause damage to the
brake cylinder.
Press (0K] to continue,Press
0K ESC
Move TO The Assembly Position
Status Of Left Electric parking
Brake:lN ASSEMBLY POSITION
Status Of Right Electric Parking
Brake:IN ASSEMBLY POSITION
0K ESC
Move To The Assembly Position
Status Of Left Electric Parking
Brake:IN ASSEMBLY POSITION
Status Of Right Electric Parking
Brake IN ASSEMBLY POSITION
Position
0K
EN
ESC 0K ESC
12
To Next Page
Loading...