Move To The Assembly Position
Please Check The Motor Has Fully
Released
0K ESC
Move To The Assembly Position
Procedure Was completed
Successfully
0K ESC
Note: The special features of each model are different, please
according to the actual operation.
5. OBDII System
5.1 Read Codes
Select [OBDII] and select [Read Codes], it will be displayed as
follows:
reset
ETC
Diagnostic Menu
Benz
00
odes
Erase Codes
11M Readiness
Data Stream
Evap System Test
Vehicle Information
13
DTC
43
Generic Current
02 Sensor Circuit Low Voltage
Bank 1 Sensor 3
csc
EN
To Next Page
Loading...