Dans le système Engine, choisissez [Fonction spéciale] et il
s'affiche comme suit:
Choisissez [Injector Quantity Adjustment] et il s'affiche comme suit:
Appuyez sur le bouton [OK] pour passer à l'étape suivante:
2.2.3 Injector Quantity Adjustment(IQA)
Injector Quantity Adjustment
OK ESC
Carry out this procedure to
enter the new IQA date whenever
a fuel in ject is replaced or to
make a correction to the existing
in jector IQA data currently stored
in the PCM.
OK ESC
On the following screen,the
diagnostic tester will attempt to
retrieve the in jector IQA data
from the PCM allowing for
verification and data entry.
Perform the following :
Sélectionner la fonction
ABS Service Bleed
Réinitialiser PCM KAM
Clear Transmission Adaptive T...
5/5
DPF Manual Regeneration
IQA
Injector Quantity Adjustment
Injector 1
OK
Delete
1
0
2
3
4
3/38
Enter the character IQA
data
36FR
To Next Page
Loading...
