Choose [Erase Fault Codes] then press [OK] button, screen
displays as follow:
You need to press [OK] again to clear the fault codes.
It shows as follow after clearing the fault codes.
If you give up clearing fault codes, please press [ESC] button.
2.1.2 Erase Fault Codes
Information
OK ESC
Erase fault codesl
Are you sure?
Information
OK ESC
Erase fault codes had Success.
Please wait 10 seconds.Turn
ignition off and Switch on again.
Read fault codes to verify.
Select Function
Read Fault Codes
Erase Fault Codes
Read Datastream
1/3
Read Fault Codes
OK ESC
P01F0 1/55
Coolant Temperature Relapsed
Lower Than Diagnostic
Monitoring Temperature
7 EN
To Next Page
Loading...
