ANCEL S100 - Page 4

Configured for
certain models
Configured for
certain models
Configured for
certain models
Configured for
certain models
Configured for
certain models
Adapter
Cone Set
EVAP
Adapter
EVAP
Removal Tool
Block-cap set
Air Adapt
(U.S. Standard)
Applicable for 25~55mm round shaped
opening, eg.fuel tank, cooling system,
engine oil filler port, exhaust etc.
For fitting to the evap service port,
mostly available on vehicle made in
North America.
EVAP service port valve removal tool,
note the thread is anti-clockwise.
Mostly used when work on leak test on
vehicle engine while it’s unmounted
from the vehicle.
For introducing shop air.
S100 S100 Pro S110 S110 Pro S160
Function
Configuration
√ √ √ √ √
√ √ √ √ √
√ √ √ √ √
√ √ √ √ √
√
√
√
√ √ √ √
Output Pressure 0.5psi 0.5psi 0.5psi 0.5psi 0.8-1.2bar
Air Source
External
shop air
needed
inbuild air
compressor
External
shop air
needed
inbuild air
compressor
inbuild air
compressor
Smart PCA Inbuilt
Flow Meter
√ √
Mechanical Pressure Gauge
Digital Pressure Gauge
Power Cord
Hook
Smoke Hose
Funnel
1" Intake Blad
der
1" Intake Bladder Replacement
Rubber
1.5" Intake Bladder
1.5" Intake Bladder
Replacement Rubber
Adapter Cone 25-85cm
Adapter Cone Set 17-55mm
23pcs Blockoff Cap Set
EVAP Test Kit
Smoke Diffuser
∅
∅