Scope of use
The smoke leak detector, with its WYSIWYG efficiency, is widely applicable to the leak test of various
pipeline systems and quick pinpoint leak position. This product can effectively find the leakage position
by simulating most suitable operating pressure condition of the vehicle pipeline, and introducing the
smoke into the vehicle pipeline system through appropriate adapters. It can be used to test air intake
system, exhaust system, inter-cooling system, oil circuit, water lines and other pipeline systems that
users can image.
Accessories
The following list is designed to familiarize you with the function and the usage scenarios of the
standard configured and optional accessories of the product.
Note: Please refer to the specific product configuration for the applicability of the introduction.
Picture Article Description Remarks
Power Cord
Delivery Hose
Hook
Funnel
Intake Bladder
Adapter Cone
Configured for
certain models
Configured for
certain models
Configured for
certain models
Configured for
all models
Configured for
all models
Configured for
all models
Configured for
all models
Service
Replacement
For connecting power supply to
the unit. Fitting size 5.5x2.5mm
For hanging up the main unit.
Air/smoke delivery hose to introduce
air/smoke from main unit to the
system directly or via adapters.
Refilling assistant tool to prevent the
smoke oil from flowing into the casing
during filling, which would cause
unexpected failure.
Applicable for 25~140mm opening,
especially when the opening is not
round shaped.
Replacement rubber and clamps for
intake bladder.
Applicable for 30~80mm round
shaped opening. Eg.intake.
Note: avoid contact to oil and high temperature.
To Next Page
Loading...