Safety precautions
To avoid body injury and damage to the device or your car,
please read this manual carefully before using VD700.
The testing process described in the manual is generally the
experience of technician.
Safety precaution is required in most of
the process to avoid body injury and damage to the device or
your car.
Read the vehicle maintenance manual before use this device
and follow safety precautions.
• It generates CO and other poisonous air when engine is
running. To avoid
this kind of hurt, please repair the car in a well-air-ventilated
place.
• When the engine is running, many parts (such as the coolant
fan,
pulleys, fan belt etc.) rotate at high speed. To avoid serious injury,
always be aware of moving parts. Keep a safe distance from
these
parts as well as other potentially moving objects.
• Engine parts become very hot when the engine is running. Don't
touch hot engine parts to avoid severe burns.
• When the ignition is ON, Connecting or disconnecting test
equipment
will damage test equipment and the vehicle's electronic compo-
nents. Turn the ignition OFF before connecting or disconnecting
the device from the vehicle's Data Link Connector (DLC).
• Fuel and battery vapors are highly flammable. To prevent an
explosion,
keep all sparks, heated items and open flames away from the
battery
and fuel/ fuel vapors. Do not smoke near the vehicle during
testing.
1
To Next Page
Loading...
