ANCEL VOD700 - Page 10

4.2. I .3 Select [ Erase fault codes ], and then press the [0K]
button .The screen is displayed as follows:
Select Function
Version Information
Read Fault Codes
Erase Fault Codes
Read Datastream
3/4
Information
Erase fault codes had Success.
Please wait 10 seconds. Turn
ignition off and Switch on again.
Read fault codes to verify.
0K ESC
Information
Erase fault codes!
Are you sure?
0K
ESC
4.2.1.4 Select [Read Datastream], then press the [0K] button.
The screen is displayed as follows:
Select Function
Version Information
Read Fault Codes
Erase Fault Codes
Read Datastream
4/4
8
I ew
Datastream
ems
Select Items
1/2
EN