Select Function
Reset the SRI(CEM)
Reset the SRI(DIM)
2/2
Prompt Message
Communicating, Please Wait
0K ESC
4 4.2 Reset ETC
Prompt Message
Ignition On
0K ESC
Prompt Message
The Sr1(Service Reminder
Lamp) Resetting Finished.
0K ESC
Select [ETC reset] function step by step and will be displayed as
follow:
To perform the throttle matching function, the following condi-
tions must be met:
Please turn the ignition ON with the engine OFF.
Make sure there are NO fault codes in the engine control unit.
Turn off all electrical loads.
The temperature of the coolant must be above 850C
The accelerator pedal must not be depressed.
OBOI
EPB reset
ETC reset
For Volvo
Tool Setup
12
3
Oil reset
gus reset
EN
To Next Page
Loading...
