7.6 Feedback of the test result
I) If the device indicates a connection error with the vehicle or
any other problem during use, please use the feedback function.
Select [Feedback the test result] and it will be displayed as
follows:
Tool Setup
Language
Beeper
Instructions(Display at startup)
Unit of Measure
Skin style
Feedback the test result
Device Information
6/7
Feedback
Automatic recording is ready,
perform the related functions that
require feedback
After the execution, disconnect
the car, connect to the computer
via USB use the update.exe tool.
0K ESC
For example: Register battery change enter [Register battery
change], and execute register battery change again (This step is
very important).
Note: keep the unit connected to the vehicle during the above
steps.
2) After you have registered the battery change, disconnect the
device from the vehicle.
3) Transfer the data to your computer and create a feedback
file. (You will need to download the upgrade file from the ANCEL
website to your computer).
EN 21
To Next Page
