EXERCISE MONITOR INSTRUCTION MANUAL
COUNT TIME TOTAL COUNT CALORIES
■KDY FUNCTIONS：
Pressing the MODE key to select and lock on a function for following sequence:
SCAN
COUNT
TIME
TOTAL COUNT
CALORIES
Pressing and hold the MODE key with 3 seconds to reset the value to zero
(without TOTAL COUNT).
■SLEEP MODE：
The system turns on when the MODE key is depressed or when the system
sensed a signal input from the sensor.
● The system turns off automatically when the sensor has no signal input or no
key are pressed for approximately 4 minutes.
●
■FUNCTIONS:
SCAN: Display changes according to the next diagram every 6 seconds.
COUNT: The current count will be displayed when starting exercise.
TIME: The total working times will be displayed when starting exercise.
TOTAL COUNT: The total count which this function is refers to from battery
capacity period runs.
CALORIES: The calorie burned will be displayed when starting exercise.
■Specification
0 分:-90min0sec~99min59min
To Previous Page
Loading...