Ancona Eleganzia - User Manual

© ®
P S I
G P M
Two Handle Roman Tub Bathroom Faucet
STANDARDS
Tools:
PLUMBERS PUTTY FLASHLIGHT BASIN WRENCH
SAFETY GLASSES SCREWDRIVER
PLIERSCHANNELLOCKS ADJUSTABLE WRENCH
HEX-KEY TAPE
Attention:
Helpful Information
Flow Rate Chart
Important
Eleganzia
2017-12-22 MAAN4322-1
SEALED-TUBE
Please keep the tools for future use!
ASME A112.18.1/CSA B125.1
ASME A112.18.2/CSA B125.2
LISTED IAPMO/cUPC
Gather the necessary tools as shown below to complete the installation of
this faucet. Some may not be needed depending on the model of faucet you
are installing. Check with your local hardware store on the requirements of
your installation situation.
WARNING:
For easy installation, you will need:
- To read all the installation instructions completely before beginning.
- To read all the warning, attention and maintenance information.
- To purchase the proper supply lines.
Tighten connection with two wrench to prevent
damage to tube body. Be careful not to bend the
stem as this will void the product warranty.

Summary

Helpful Information

Installation Attention

Key points to read before and during installation for ease and safety.

Tightening Precautions

Warning to use two wrenches for tightening to avoid product damage.

Faucet Installation Guide

O-Ring Installation Warning

Critical reminder for correct O-ring placement between hand shower and hose.

Faucet Installation Steps

Supply Valve Requirement

Important notice that supply valves are not included and must be purchased separately.

Leak Checking and Testing

Cleaning and Care

Installation Hose Warning

Warning to ensure hose connections are secure but not over-tightened during installation.

Installation Hose Attention

Cautionary note regarding hose tightness to prevent damage to seals.

Ancona Eleganzia Specifications

General

Product Type	Towel Warmer
Voltage	120 V
Wiring	Hardwired
Type	Electric
Mounting Location	Wall Mounted
Material	Stainless Steel