AND HR Series User Manual

H
H
R
R
S
S
e
e
r
r
i
i
e
e
s
s
P
P
r
r
e
e
c
c
i
i
s
s
i
i
o
o
n
n
E
E
l
l
e
e
c
c
t
t
r
r
o
o
n
n
i
i
c
c
B
B
a
a
l
l
a
a
n
n
c
c
e
e
s
s
Instruction Manual
1596-5A-IE-99.03.26
HR-60
HR-120
HR-200
HR-202
HR-300

AND HR Series Specifications

General

Brand	AND
Model	HR Series
Category	Scales
Language	English

Summary

Introduction

Features

Lists key capabilities of the HR series balances, including dual range and serial interface.

Options and Accessories

Details optional equipment like serial interfaces, printers, and anti-theft devices.

Compliance with FCC Rules

Outlines the balance's compliance with FCC Class A computing device regulations.

Unpacking Your Balance

Balance Location

Recommends placing the balance on a solid, level surface away from drafts and magnetic fields.

Best conditions for weighing

Advises on warm-up, cleanliness, zeroing, quick weighing, and avoiding static charge or magnetic materials.

Setting up your Balance

Details how to level the balance, install the weighing pan, and connect the AC adapter.

Keys and Displays

Displays

Explains the normal weighing display, stabilization mark, and stand-by indicator.

Keys

Describes the function of the ON:OFF, RE-ZERO, RANGE, MODE, and PRINT keys.

Units

Weighing Units and their Conversions

Lists various weighing units and their conversion factors to grams.

Selecting the Weighing Units

Weighing

Simple Weighing

Step-by-step instructions for performing a basic weighing operation.

Counting Mode (pcs)

Selecting the quantity to be used as a sample

ACAI Automatic Counting Accuracy Improvement

ACAI Notes

Counting Mode using Digital Input of Unit Weight

Percent Mode (%)

Percent Mode (%) with Digital Input of 100% Weight

Environment Response Adjustment

Conditions of response

Explains how to adjust the balance's response rate to environmental changes.

Calibration

Displays and canceling calibration

Explains calibration-related error messages and symbols.

Manual Calibration

Details the procedure for manual calibration using a known calibration mass.

Zero-point-Calibration

Outlines steps to perform zero-point calibration when the zero point has shifted.

Functions

C-parameter keys and displays

Explains using MODE and RANGE keys to select C-parameters.

Internal parameter setting

Guides users through changing internal software parameters.

C-parameter settings

Details C-parameter groups and their specific settings.

Miscellaneous

Digital Tare

Explains how to set and use the digital tare function.

The ID number

External key connector

Underhook Weighing

An Example of Underhook Weighing

Errors

Specifications

External Dimensions