Need help?Do you have a question about the AND GR Series and is the answer not in the manual?
General| Calibration | External Calibration |
|---|---|
| Power Supply | AC adapter |
| Interface | RS-232 |
| Units | g, oz, ct, lb |
| Material | Stainless Steel Pan |
Highlights the main capabilities and built-in functions of the GR series analytical balances.
Details regulatory compliance with FCC rules for radio frequency energy.
Guidelines for optimal balance installation to ensure accurate weighing.
Important considerations during use to achieve precise and reliable weighing results.
Instructions for proper maintenance, cleaning, and transportation of the balance.
Information on using the AC adapter and recommended warm-up time.
Step-by-step guide for assembling and setting up the balance after unpacking.
Explanation of balance display indicators and the function of each key.
Procedure for selecting and customizing the sequence of weighing units.
General precautions to ensure accuracy and prevent errors during weighing.
Step-by-step guide for performing basic weighing in gram mode.
Instructions for using the balance's counting mode to count items.
Guide to using the percent mode for percentage measurements.
How the balance automatically adjusts to environmental conditions for stable readings.
Procedure for manually adjusting the balance's response to environmental factors.
Important considerations regarding the accuracy and use of external calibration weights.
Balance auto-calibration triggered by ambient temperature changes.
Procedure for calibrating the balance using its internal calibration weight.
How to test balance accuracy using the internal calibration weight.
Procedure for calibrating the balance using an external reference weight.
How to test balance accuracy using an external calibration weight.
Method to adjust or correct the balance's internal weight value.
Configuring switches to protect balance parameters from accidental changes.
Procedure to reset the balance to its factory default settings.
Overview of how the function table menu is organized and navigated.
Explanation of the interface elements used for interacting with the function table.
Descriptions of various parameters and their settings within the function table.
Configuration options for environmental factors and display behavior.
Customizing how and when weighing data is output from the balance.
Explanation of different data formats available for outputting weighing results.
Illustrative examples of how weighing data appears in various formats.
Purpose of using ID numbers and Good Laboratory Practice (GLP) reports.
Step-by-step guide to assign an identification number to the balance.
How to configure the balance for outputting GLP reports.
Details of the calibration report generated using the internal weight.
Details of the calibration report generated using an external weight.
Details of the test report for calibration using an external weight.
Methods for storing weighing data in the balance's memory.
Configuring function table settings for effective data memory usage.
Steps required to activate the data memory feature on the balance.
Procedures for retrieving and transmitting stored data from the balance memory.
Instructions for clearing all data stored in the balance's memory.
Mathematical formula used to calculate the density of a solid.
Steps to change the function table to enable specific gravity measurement.
How to input liquid temperature or density for measurement.
Steps for measuring and displaying the density of a sample.
Comprehensive guide for performing density measurements accurately.
Details on transmission system, data format, and pin connections for RS-232C.
Information on using external switches for balance control via contact input.
Guide for connecting and configuring the balance with the AD-8127 printer.
Instructions for connecting and configuring the balance with the AD-8121B printer.
How to connect the balance to a computer for data transfer and control.
Software for PC communication, data analysis, and balance control.
Comprehensive list of commands for balance operation and data management.
Commands used to query and retrieve weighing data from the balance.
Commands that allow direct control over balance functions like calibration and display.
Commands to request and transmit data stored in the balance's memory.
Explanation of codes indicating command processing status and errors.
Information on using CTS/RTS for flow control in serial communication.
Internal settings related to RS-232C output and serial interface configuration.
Practical examples demonstrating how to use various balance control commands.
Guidelines for proper care, cleaning, and handling of the balance.
A list of error codes and their corresponding descriptions and solutions.
Explanation of various indicators and symbols that appear on the balance display.
Detailed physical dimensions and measurements of the balance.
Information on available optional accessories that enhance balance functionality.
To Next Page
