Anden AS35FP User Manual

Water quality and canister selection
The Steam Humidifier operates on water with conductivity between 75 and 1,250 EC.
• Connect to water supply. Do not use RO or DI water.
• Use cold water only.
WATER QUALITY GUIDELINES
EC (1:1) Research Grains/Gal Hardness
Recommended Canister by Voltage
120VAC 208VAC 240VAC
75-100 0-3 Naturally Soft Installation Not Recommended AS80LC AS80LC
100-300 3-9 Naturally Soft AS80LC AS80LC AS80LC
300-500 9-15 Slightly Hard AS80LC AS80 AS80
500-650 15-20 Moderately Hard AS80LC AS80 AS80
650-850 20-25 Hard AS80LC AS80 AS80
850-1250 25-36 Very Hard AS80LC AS80 AS80
above 1250 above 36 Extremely Hard Installation Not Recommended
Softened AS80 AS80 AS80
4
5
FACTORY SETTING FOR
11.5 AMP NOMINAL OPERATION
RECOMMENDED SETTING
SLIDE DIP SWITCH #1 TO “ON” POSITION
FOR 16.0 AMP NOMINAL OPERATION
120
LED D8
208 240
120 208 240
Capacity
Settings are chosen based on desired capacity.
STEAM CAPACITY
Amperage Voltage Maximum Steam Capacity (gal/day)
11.5
120V 11.5
208V 20.5
240V 23.3
16.0
(Nominal)
120V 16.0
208V
(recommended)
30.0
240V
(recommended)
34.6
Circuit board dip switches
For max capacity connect to 240V and set dip switch from 11.5 to 16 Amps.
90-1959
2

Anden AS35FP Specifications

General

Brand	Anden
Model	AS35FP
Category	Humidifier
Language	English