Andersen Hitches Ultimate 5th Wheel Connection User Manual

andersenhitches.com
IMPORTANT! DEALER OR INSTALLER: Please make sure your customer receives
this manual for safety tips, warranty, and future removal or installation information
Important Safety Information .............................................
Contact Andersen Hitches Customer Service ....................
Parts Illustration .................................................................
Section 1: Turning Clearance ............................................
Section 2: Installing the Base Unit .....................................
Section 3: Installing the Kingpin Coupler Block .................
Section 4: Attaching the Remote Latch Cable Bracket ......
Section 5: Connecting Your Trailer to the Base Unit ..........
Section 6: Removing the Base Unit ...................................
Popular Add-ons for your Ultimate Connection .................
Warranty Information .........................................................
Page 2
Page 2
Page 3
Page 4
Page 4
Page 5
Page 7
Page 8
Page 9
Page 10
Page 11
Table of Contents
Want to see a video of the install?
Use your Smart Phone to scan the
QR Code above and to go to
our Installation Videos on the web.
NOTE: THERE IS NEVER A NEED TO GREASE BALL OR COUPLER
Ultimate 5th Wheel Connection - Rail Mount
INSTALLATION MANUAL
For Part #3200 • 20,000 lbs GTWR - 4,500 lbs Tongue

Andersen Hitches Ultimate 5th Wheel Connection Specifications

General

Type	5th Wheel Hitch
Hitch Type	5th Wheel
Weight Capacity	24, 000 lbs
Gross Trailer Weight	24, 000 lbs
Tongue Weight	N/A (5th Wheel Hitch)
Ball Size	N/A (5th Wheel Hitch)
Connection Type	Kingpin
Material	Steel
Warranty	Lifetime limited warranty

Summary

Important Safety Information

Safety Checks and Warnings

Before each trip, check hardware and be aware of turning clearance for safe operation.

Parts and Tools Identification

Kingpin Coupler Assembly Components

Base Assembly Components

Installing the Base Unit

Base Unit Placement in Truck Bed

Guides placement of the base unit in the truck's rail system for optimal clearance.

Installing the Kingpin Coupler Block

Coupler Block Position and Clearance

Explains how to position the coupler block for adequate tailgate and side rail clearance.

Kingpin Coupler Block Installation

Attaching and Securing Coupler Block

Details steps for attaching the block with bolts, nuts, and tightening set screws to specified torque.

Remote Latch Cable Bracket Installation

Bracket Mounting and Cable Routing

Remote Latch Cable Operation

Connecting Trailer to Base Unit

Pre-connection Checks and Alignment

Ensures latch is open, screws are tight, and trailer kingpin is aligned over the ball.

Securing the Trailer Connection

Details lowering the trailer, seating the ball, and locking the remote latch securely.

Removing the Base Unit

Disengaging and Removing Base Unit