5
1. Unplug the appliance and remove the chopper lid.
Note: Do not immerse the detachable shaft of the
blender and chopper lid in water because overtime
the lubrication on the bearings may wash away.
2. Wash the detachable shaft under running water,
without the use of abrasive cleaner or detergents.
After finishing cleaning the detachable shaft, place
it upright so that any water which may have got in,
can drain out.
3. Wash the cup and blade in warm soapy water. The
cup is not recommended to place in dishwashing
machine as the plastic component deteriorated
through prolonged use of dishwasher cleaning.
4. Wipe the motor unit with a damp cloth. Never
immerse it in water for cleaning as an electric shock
may occur.
5. Dry thoroughly.
Caution: Blades are very sharp, handle with care
For a quick wash up
Between processing tasks, hold the stick blender in the
cup half filled with water and turn on for a few seconds.
Cleaning and Maintenance
Bockasjögatan 12
50430 Borås
Sweden
Technical Specifications
Model: HDB 1.0
Rated Voltage: 220-240 V, 50 Hz
Rated Power: 200 W
To Next Page
Loading...