8
Operation
Installation:
1. Connect the Antenna’s built-in coaxial
antenna cable to your TV or TV box.
2. If the signal is weak, you can use an
Signal Amplifier by connecting the
Antenna’s built-in cable to the input
jack of the Signal Amplifier. Then
connect the Signal Amplifier’s cable
to the antenna input on your TV or TV
box.
Note: If you have trouble receiving a
good signal, with the Signal Amplifer or
just the Antenna alone, try reposition
the antenna. If you still cannot get a
good signal, it is possible that a roof
top antenna is required.
Signal Amplifier
Power
Adapter
Antenna
TV
TV Box
To Next Page
Loading...
