Andersson PYC 3.1 - Overview and Operation; Before First Use; Get Started

English
6
Overview
1. Temperature adjustment
2. Display
3. On/Off with LED indicator
4. Transparent lid
5. Side table
6. Control panel
7. Ball bearing casters
Included:
´ Party Cooler
´ Two side tables
´ Two inner baskets
´ Power Cable
´ User manual
Before First Use:
´ Remove all packaging material from the party cooler.
´ It must stand upright for 24 hours before its initial use, or
else it will become damaged and not function.
´ Clean the interior of the unit before starting it. Use
lukewarm water with mild detergent and wipe dry
thoroughly.
´ When you start using the device for the first time, let it
run continuously for 12-18 hours.
Get Started:
´ Connect the unit to a grounded outlet.
´ Press the ‘On/Off’ button on the control panel to start
the party cooler.
´ Press the ‘Temperature’ button to set the temperature.
The display will flash during the adjustment. When using
the unit, the display will show the average temperature in
the party cooler.
´ Fill the party cooler with drinks - it fits up to 85 cans!
1 2 3
4
6
7
5
Operation