Need help?Do you have a question about the Andover Controls DI-8 and is the answer not in the manual?
General| Brand | Andover Controls |
|---|---|
| Model | DI-8 |
| Category | I/O Systems |
| Language | English |
Displays the physical size specifications of the standard I/O case.
Details modules designed for mounting in the Andover Controls Continuum enclosure.
Explains how CPU connects to I/O modules and how modules connect to each other.
Discusses the limit on I/O modules based on power supply capacity.
Provides recommendations for cable lengths and repeater usage for communication interfaces.
Covers placing I/O modules remotely and potential signal issues.
Illustrates typical installations showing the placement of terminator resistors for bus termination.
Provides essential guidelines for wiring input and output circuits to prevent errors.
Describes the UI-8-10 Universal Input Module and its 0-5V or 0-10V input range.
Details the DI-6-AC digital AC input module, its 24-120V or 120-240V input range.
Explains the DI-8 digital input module for dry contacts or 0-5V input, and counter functions.
Covers the MI-6 milliamp input module for 0-20mA sensors with 10-bit A/D conversion.
Describes the DM-20 Digital Input/Output module with 20 general purpose points.
Details the AO-4-8 Analog Output Module with 4 outputs, configurable as voltage or current.
Explains the DO-4-R Digital Output Module with 4 Form C relay outputs for inductive loads.
Covers the DO-6-TR Triac Output Module with six triac-based outputs for lighting and fan control.
Describes the LO-2 Lighting Control Module for controlling high voltage lighting circuits.
Details the AC-1 Access Control Module for door and portal access control.
To Next Page