Need help?Do you have a question about the Andover Controls UI-8-10 and is the answer not in the manual?
General| Input Channels | 8 |
|---|---|
| Voltage Input Range | 0-10 VDC |
| Communication Protocol | BACnet MS/TP |
| Power Supply | 24 VAC/VDC |
| Humidity Range | non-condensing |
Overview of the Continuum I/O system, its features, and capabilities.
Details the physical size and measurements of the standard I/O case.
Describes the Andover Controls Continuum enclosure for mounting modules.
Step-by-step instructions for attaching modules to a standard DIN rail.
Explains how power and communication signals are routed between CPU and I/O modules.
Details direct module-to-module connections and cable assemblies.
Covers maximum number of modules and bus length, including repeaters.
Illustrates proper placement of terminator resistors for bus communication.
Provides essential guidelines for reliable input wiring, grounding, and signal integrity.
Details the UI-8-10 and UI-8-10V universal input module features and specifications.
Covers the DI-6-AC and DI-6-AC-HV modules for detecting AC voltage levels.
Describes the DI-8 module for sensing digital inputs or contact closures.
Explains the MI-6 module for connecting 0-20mA current sensors.
Details the DM-20 module for general purpose digital I/O and its interfaces.
Covers the AO-4-8 module for voltage and current analog outputs with override options.
Describes the DO-4-R module with Form C relay outputs and override capabilities.
Details the DO-6-TR module for triac-based AC outputs and PWM control.
Covers the LO-2 module for controlling lighting circuits using GE relays.
Explains the AC-1 module for door access control, readers, and inputs.
To Next Page