4
Andover Controls
Mechanical Installation
Each I/O module, except the Display variety, is enclosed in the same standard plastic
case that is designed to be mounted on a standard DIN rail or fastened to a panel.
Note: In order to meet agency requirements, it is necessary that the modules along
with the power supply and controller be housed in another metal enclosure i.e., a
NEMA box or the new Andover Controls Continuum enclosure.
The standard I/O module plastic case is illustrated below:
Status indicators and operator switches are located on the indicator panel. Other
switches available for module configuration may be accessed by lifting the hinged door to
the module as shown.
Status Indicators
& some switches
Connections to
controlled/sensed
e
uipment
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...