Andrew James Multifunctional Processor - Page 7

7
Knife Blade/ Dough Tool
Assembly
1. Place drive sha (4) into the centre of the power unit (5). Ensure it is rmly
in place.
2. Guide the 1.5L mixing bowl (3) over the drive sha (4) and align with the
locking system. Turn the bowl clockwise unl it is locked rmly in place.
3. Place the blade (16) over the drive sha (4) unl it reaches the base of the
bowl.
4. Place the bowl cover (2) on the 1.5L bowl (3), aligning it with the locking
system. Turn the bowl cover clockwise unl the lid locks into place at the
top of the handle.
Please note: Due to a safety locking system the food processor will not work unl
the components are locked in place correctly.
Disassembly
1. Unlock the bowl cover (2) by turning it an-clockwise and remove the knife
blade (16).
2. Turn the bowl (3) an-clockwise unl it comes free of the locking system.