Need help?Do you have a question about the Anemoment TriSonica Mini and is the answer not in the manual?
Explains warning symbols used for safety and handling.
States there are no consumable materials to be replaced.
Provides instructions for cleaning the exterior surface of the sensor.
Details specifications for replacement or user-built power cords.
Lists safety warnings regarding power and usage of the USB adapter.
Describes the materials used for the sensor body and connectors.
Explains the North indicator and its effect on wind direction readings.
Details the TSM-FB model's flat base and mounting points.
Specifies requirements for mounting platforms for the TSM-FB.
Describes an optional adapter for mounting the TSM-PM.
Details the wiring and connection for the TSM-FB model.
Provides instructions for connecting the TSM-FB to a computer via USB adapter.
Describes the TSM-PM's connector and cable options.
Explains how to view the data stream from the TSM sensor.
Describes the structure and format of the sensor's ASCII data output.
Lists the default serial communication parameters for the TSM Sensor.
Outlines various methods for configuring the TSM Sensor.
Describes accessing basic settings via the serial menu.
Explains triggering modes and parameters for TSM-PM.
Describes the 'display' command and its output.
Details the process for calibrating the anemometer sensor.
Explains how to perform level calibration for the accelerometer.
Guides the user through calibrating the magnetic compass.
Discusses the humidity sensor and factors affecting readings.
Describes the absolute pressure sensor and its behavior.
Explains the tilt measurement and calibration process.
Details the compass sensor and its calibration procedure.
Addresses common issues encountered during initial setup.
Outlines the 90-day warranty terms and exclusions.
Provides contact information for defective product returns.
Details Anemoment's limitations on liability for product use.
General| Resolution | 0.01 m/s |
|---|---|
| Temperature Accuracy | ±0.5 °C |
| Pressure Range | 300 to 1100 hPa |
| Humidity Range | 0 to 100% RH |
| Ingress Protection | IP67 |
| Wind Direction Range | 0 to 360 degrees |
| Wind Direction Accuracy | ±2° |
| Pressure Accuracy | ±0.5 hPa |
| Humidity Accuracy | ±3% |
| Data Output | RS-232, SDI-12 |
| Sampling Rate | 1 Hz |
| Power Supply | 5 to 30 VDC |
| Measurement Parameters | temperature, pressure, humidity |
To Next Page