Anest Iwata ISP-250C User Manual

.
Instruction Manual (Original Instructions)
Oil-free Scroll Vacuum Pump
ISP-250C
ISP-500C
※ Before use, be sure to fill in the blank spaces below for future repair and after-service.
Serial No.
Who sold it to you
Purchase date
When you began
operation
This instruction manual includes very important warnings, cautions and
operating
procedure in order to operate this pump safely and efficiently.
Be sure to read this instruction manual thoroughly and fully understand before
operation.
After reading it, store it in a convenient place for immediate and future reading.
LR104996
Our product have got CSA approval.
(Canadian Standards Association)

Anest Iwata ISP-250C Specifications

General

Brand	Anest Iwata
Model	ISP-250C
Category	Water Pump
Language	English

Summary

Important Information and Safety

Safety Guidelines, Marks, and Symbols

Details safety instructions, WARNING/CAUTION marks, and operational symbols.

Safe Operation Procedures

Safe Lifting and Handling

Safe practices for lifting the pump, including weight and stability considerations.

Electrical Safety and Wiring Guidelines

Emphasizes qualified electricians, power cutoff, and using protective devices.

Safe Operation Procedures

Electrical Connection Safety

Details proper use of terminals, grounding, cable protection, and avoiding alterations.

Maintenance and Restart Safety

Procedures for maintenance and awareness of thermal protector automatic restarts.

Safe Operation Procedures

Electrical Checks and Basic Troubleshooting

Importance of checking voltage, identifying problem causes, and removing blank flanges.

Package Handling and Unpacking

Safe Lifting and Unpacking

Safety instructions for lifting and handling the vacuum pump package during unpacking.

Installation Guidelines and Safety

Site Safety and Environmental Considerations

Site requirements, avoiding moisture and hazards, and considering ambient temperature.

Installation Guidelines and Safety

Electrical Wiring Safety Procedures

Importance of qualified electricians, power cutoff, and installation of protective devices.

Installation Guidelines and Safety

Motor Protection and Wiring Details

Details motor protection, cable sizing, terminals, grounding, and thermal protector awareness.

Troubleshooting Wiring Connections

Voltage Verification for Motor Operation

Electrical Wiring Procedures

Single-Phase Wiring Instructions

Three-Phase Wiring Instructions

Test Operation Procedures

Performing the Test Operation

General Operation Safety Precautions

Hazardous Gas and Foreign Matter Prevention

Prohibits evacuation of hazardous gas and entry of foreign matter into the pump.

Alteration and Component Change Safety

Standard Operation Procedures

Start-Up Procedure

Shut-Down Procedure

Maintenance and Inspection Overview

Maintenance Safety Protocols

General safety rules for maintenance, preventing injury, burns, and electric shock.

Daily Maintenance Checks

Scheduled Maintenance Procedures

Troubleshooting Common Issues

Motor Performance Problems

Remedies for motor not rotating or stopping unexpectedly.

Pump Performance Issues