6
Assembling your cyclone vacuum cleaner:
Attention:
Before attaching or detaching any accessories always ensure that you
unplug the power supply from the wall socket!
1. Attaching or detaching the hose:
To attach: Push the vacuum hose into the air
intake opening until it snaps into place.
To detach: Push the button on the vacuum
hose to release the hose.
2. Attaching the telescopic tube and its
Mount the telescopic rube onto the
Set the telescopic tube to the desired length. In order to do this,
simply push the slide on the telescopic
tube forwards before pulling on the lower
part of the tube until it has reached the
length required. Once you have selected
the optimum length, let the slide return
to its original position and ensure that it
Now attach the floor brush to the
telescopic tube as shown in the diagram.
Attach the crevice nozzle and brush
nozzle using the same method.
Before use ensure that you have released a sufficient length of
cable, and then plug the device into the wall socket. The ideal
cable length is identified on the cable by a yellow marking. When
unrolled, the cable should not exceed the maximum length. This is
To Next Page
Loading...