EasyManua.ls Logo

ang RAX2130SQB-1 - User Manual

Default Icon
81 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
KOBE Range Hoods
Brillia Series
Model No. / N
os
de modèles / Modelo No.
Under Cabinet:
RAX2130SQB-1 (30”)
RAX2136SQB-1 (36”)
RAX2142SQB-1 (42”)
Wall Mount:
RAX2130SQB-WM-1 (30”)
RAX2136SQB-WM-1 (36”)
RAX2142SQB-WM-1 (42”)
INSTALLATION INSTRUCTIONS
AND OPERATION MANUAL
MANUEL D'INSTALLATION
ET MODE D'EMPLOI
INSTRUCCIONES DE INSTALACIÓN
Y MANUAL DE OPERACIÓN

Table of Contents

Questions and Answers

  • M
    Michelle WilliamsJul 27, 2025
    Why is my ang Ventilation Hood not venting out correctly?
    • M
      Megan WhiteJul 27, 2025
      If your ang Ventilation Hood isn't venting correctly, it might be due to several reasons. First, the hood could be installed outside the recommended clearance, which should be adjusted to 26” to 30” between the hood and cooktop, or 30” to 36” for island hoods. Insufficient make-up air inside the house can also be a factor, so try opening a window to improve performance. Obstacles blocking the duct work should be removed, and ducting should be changed if the pipe size is smaller than suggested.
  • C
    campbelljessicaAug 1, 2025
    How to fix ang Ventilation Hood when motors and lights are not working after installation?
    • A
      Alan MccormickAug 1, 2025
      If the motors and lights of your ang Ventilation Hood aren't working after installation, the power might not be on. Ensure the circuit breaker and the unit's power are ON, and use a voltage meter to check the power supply. Also, check and tighten any loose wire connections. If these steps don't resolve the issue, the control panel may be defective and require replacement.
  • N
    nwaltersAug 6, 2025
    What to do if the motor is working but the lights are not working on my ang RAX2130SQB-1 Ventilation Hood?
    • L
      Lauren MurrayAug 6, 2025
      If the motor in your ang Ventilation Hood is working but the lights aren't, the LED light fixture(s) may be defective and need replacement. Check the wire continuity from the Control Panel to the LED Driver and then to the LED light fixture(s) to ensure there are no loose connections. If the wiring is secure and the lights still don't work, the control panel might be defective and require replacement.
  • M
    millsmichelleAug 11, 2025
    Why is my ang Ventilation Hood vibrating?
    • T
      Thomas ShepherdAug 11, 2025
      If your ang Ventilation Hood is vibrating, ensure the blower system is secure by tightening the turbine impeller/squirrel cage and air chamber. If the vibration persists, the turbine impeller/squirrel cage might be unbalanced and need replacement. Also, verify the hood is securely installed by checking and tightening the mounting bracket.
  • V
    Vanessa McmillanAug 16, 2025
    What to do if lights are working but motor is not on my ang RAX2130SQB-1 Ventilation Hood?
    • W
      williamsperryAug 16, 2025
      If the lights are working on your ang Ventilation Hood, but the motor(s) is not, the motor(s) itself may be defective and require replacement. Alternatively, the capacitor(s) could be defective and also need replacing. Finally, a defective control panel could also be the cause, requiring its replacement.
  • K
    kingdouglasAug 21, 2025
    How to stop cold air coming into the home from my ang RAX2130SQB-1 Ventilation Hood?
    • L
      Lori GriffinAug 21, 2025
      If cold air is coming into your home through the ang Ventilation Hood, it could be due to a pipe connection that isn't properly sealed; check the pipe installation. Another potential issue is that the damper is either not properly installed or missing altogether. Installing the damper will help eliminate air backflow.

Summary

IMPORTANT READ THIS FIRST

Pre-Installation Checks and Problem Handling

Essential checks before installation and actions to take if any problems arise with the unit.

Return, Refund, and Exchange Policy

Conditions under which returns, refunds, or exchanges are not permitted for the product.

IMPORTANT SAFETY INSTRUCTIONS

General Fire, Shock, and Injury Prevention

General safety advice to prevent fire, electric shock, and personal injury during installation and use.

Grease Fire and Gas Leak Safety Procedures

Procedures for handling grease fires and gas leaks safely and effectively.

Electrical Shock Hazard Warning

Warning about electrical shock hazards and proper handling of components containing mercury.

COMPONENTS OF PACKAGE

Under Cabinet Application Components

Lists all parts included for the under-cabinet installation models, with diagrams.

Wall Mounted Application Components

Lists all parts included for the wall-mounted installation models, with diagrams.

INSTALLATION

Installation Preparation and Measurement

Guidance on calculating dimensions and clearances required before proceeding with the installation.

Under Cabinet Installation Procedures

Detailed steps for installing the range hood under a cabinet, including preparation, mounting, and connections.

Wall Mount Installation Procedures

Detailed steps for installing the range hood as a wall mount, including preparation, mounting, and connections.

OPERATING INSTRUCTIONS

Fan Operation Guide

Instructions on how to use the fan control, including speed selection and turning off.

Light Operation Guide

Instructions on how to operate the light control for turning the lights on and off.

MAINTENANCE

Hood Surface Cleaning

Guidelines for cleaning the exterior surface of the range hood, emphasizing safe cleaning agents.

Baffle Filter and Oil Tunnel Cleaning

Instructions for cleaning baffle filters and oil tunnels, including draining oil and washing procedures.

SPECIFICATIONS

MEASUREMENTS & DIAGRAMS

Under Cabinet Installation Diagrams

Diagrams detailing the measurements and dimensions for under-cabinet installation.

Wall Mount Installation Diagrams

Diagrams detailing the measurements and dimensions for wall mount installation.

PARTS LIST

Under Cabinet Application Parts

Detailed list of parts and their corresponding part numbers for under cabinet models.

Wall Mounted Application Parts

Detailed list of parts and their corresponding part numbers for wall mount models.

CIRCUIT DIAGRAM

TROUBLE SHOOTING

Common Issues and Solutions

A guide to diagnosing and resolving common problems encountered with the range hood operation.

WARRANTY

Warranty Terms and Coverage

Outlines the terms of the two-year limited warranty and lists specific exclusions.

Requesting Warranty Service

Provides contact details and procedures for requesting warranty service and support.

WARRANTY INFORMATION FORM

ang RAX2130SQB-1 Specifications

General IconGeneral
Brandang
ModelRAX2130SQB-1
CategoryVentilation Hood
LanguageEnglish