Need help?Do you have a question about the Angel Water A-100 and is the answer not in the manual?
General| Power Consumption (Heating) | 500W |
|---|---|
| Power Consumption (Cooling) | 80W |
| Color | White |
| Tank Capacity (Cold) | 3L |
| Material | Plastic |
| Power Source | 220V/50Hz |
Explains water hardness measurement and its relation to softener sizing.
Explains the process of regenerating the ion exchange media.
Provides guidance on salt type and periodic checks for softener maintenance.
Illustrates different bypass valve operations: Normal, Bypass, Diagnostic, Shut Off.
Describes the control valve, display panel, and buttons for programming.
Step-by-step guide for initial system setup and programming.
Guides on setting time, hardness, and regeneration parameters.
Explains the system's operating displays and how to navigate them.
Describes how the system enters and progresses through regeneration.
Instructions on how to initiate regeneration manually.
Specifies the amount of hypochlorite solution for disinfecting resin.
Addresses error codes displayed by the control unit.
Covers stalled cycles, failures, and incorrect timing.
Addresses hard water, salt water, and iron presence.
Diagnoses brine draw, drain flow, pressure loss, and salt usage.
Troubleshoots LED displays, time settings, and operational indicators.
Details the owner's responsibilities for maintaining the unit and warranty validity.
To Next Page