To Next PageTo Next PageWhy does my AngelEye SA700-AE-UK beep every 45 seconds?
If your AngelEye Smoke Alarm beeps every 45 seconds, it means the battery is low and needs to be replaced. Please refer to the ‘Battery Replacement’ section of this manual for instructions.
What to do if my AngelEye Smoke Alarm does not sound during testing?
If your AngelEye Smoke Alarm doesn't sound during testing, allow a few seconds for the alarm to settle before testing, especially if you've just activated it or replaced the batteries. Also, make sure you firmly push the center of the test button. If the alarm still fails to self-test after being recently fitted, contact Technical Support at 0800 141 2561 or technicalsupport@sprue.com.
What to do if AngelEye SA700-AE-UK beeps twice every 45 seconds?
If your AngelEye Smoke Alarm beeps twice every 45 seconds, this indicates a fault with the alarm. Inspect it for any obvious damage. Also, check that the unit contains the recommended battery type and that it is properly connected. If you're still unsure, contact Technical Support at 0800 141 2561 or technicalsupport@sprue.com.
General| Brand | AngelEye |
|---|---|
| Model | SA700-AE-UK |
| Category | Smoke Alarm |
| Language | English |
Guidance for smoke alarm placement in multi-unit dwellings and student accommodations.
Recommendations for smoke alarm installation in motels, hospitals, and dormitories.
Instructions for correctly installing and replacing the smoke alarm's batteries.
