Need help?Do you have a question about the AngioDynamics VenaCure 1470 and is the answer not in the manual?
General| Brand | AngioDynamics |
|---|---|
| Model | VenaCure 1470 |
| Category | Medical Equipment |
| Language | English |
Overview of the VenaCure 1470 laser and its operator manual.
Details the VenaCure 1470 laser system components and key features.
Explains the structure and content organization of the operator manual.
Explains caution, warning, and information symbols used throughout the manual.
Lists and defines symbols found on AngioDynamics devices and accessories.
Covers general warnings for device operation, storage, battery replacement, and acclimation.
Provides guidance on electromagnetic compatibility for the laser system and accessory cables.
Details laser classifications, hazards, and necessary precautions like eye protection.
Emphasizes extreme caution when operating near eyes and the need for protective eyewear.
Warns about potential laser burns from unintended irradiation of substances.
Advises against placing reflective materials such as glass or metal in the beam path.
Warns about flammable anesthetic gases and substances that can be ignited.
Recommends using a smoke evacuator or in-line filter during laser operation.
Outlines approved uses and conditions where the laser is contraindicated.
Discusses potential adverse reactions and cautious use with patients having prior laser difficulties.
Advises on operator training and manual familiarity for safe laser operation.
Shows the location of safety labels on the laser unit.
Lists the built-in safety features designed to ensure secure and reliable operation.
Manufacturer's declaration regarding electromagnetic emissions compliance.
Steps to prevent damage from electrostatic discharge to the laser and connected devices.
Explains the laser's compatibility with EVLT kits and the FRS system for automatic parameter setup.
Defines naming conventions for controls, modes, and menu items used in the instructions.
Provides a quick overview of the setup and initial connection steps for the laser.
Guides the end-user through the initial inspection, component check, and setup.
Details the functions of the key switch, display screen, and mode selection controls.
Describes the connectors and switches located on the rear of the laser unit.
Explains how the FRS identifies, validates, and benefits from using AngioDynamics optical fibers.
Step-by-step guide for switching on, status indicators, and basic operation.
How to set the user interface language and control its appearance on startup.
Describes the system's safety interlock verification process upon startup.
Details the process of identifying and validating connected AngioDynamics FRS fibers.
How to choose between Continuous and Pulsed treatment modes.
Guides on adjusting mode, power, pulse duration, and interval parameters for treatment.
Steps to initiate and conduct a laser treatment procedure, including pauses and ending.
Explains how to use the linear fluence function for tracking procedure progress and energy delivery.
Procedure for continuing treatment after a fault or interruption using the override function.
Options for customizing laser settings like language, audio volume, and display.
Managing software, procedures, and data by loading/saving to memory cards.
How to view and save treatment statistics, session data, and results.
Lists detailed technical specifications including laser type, wavelength, power, and dimensions.
Details the laser's electrical protection type and water ingress protection rating.
Instructions for safely cleaning the laser system enclosure with approved solutions.
Guidance on handling, inspecting, and verifying the integrity of optical fibers.
Provides solutions for common error messages displayed by the laser system.
Specific error messages related to the Fiber Recognition System and their resolution.
Lists available accessories and their AngioDynamics part numbers for ordering purposes.
Information on fiber handling, disposal, and prohibition of re-sterilization or reuse.
Step-by-step guide for safely replacing the laser's internal power fuses.
Guidelines for the proper end-of-life disposal of the laser unit according to regulations.
Information on receiving and installing new software, procedures, and feature enhancements.
Details on required maintenance, such as annual calibration checks, indicated by a wrench symbol.
Procedures for measuring and adjusting the laser's power output using external equipment.
Provides an overview of the laser's modular design, components, and internal workings.
Definitions of technical terms and acronyms used throughout the operator manual.
Outlines the terms, duration, exclusions, and conditions of the product warranty.
Instructions on how to contact AngioDynamics to make a warranty claim.
To Next Page
