Anilam 3300M - Page 6

1
Rapid
Along with the above we have “Hot Keys”
2
Line
3
Arc
6
MCode
Accesses Rapid menus.
Accesses Line menus.
Accesses Arc menus.
Input feedrate.
Tool mount.
Mcode inputs.
Inch/MM
Dwell in seconds
Changes from XY,XZ or YZ.
If * put in front of line in program ignores that line.
Input for spindle speed if available.
5
RPM
0
*
9
Plane
8
Dwell
7
Unit
5
Tool
4
Feed