Anilam 4200T - User Manual

www.anilam.com
4200T CNC
Programming and
Operations Manual

Summary

Warranty

Section 1 - Programming Concepts

Positioning Modes

Explains Absolute (from Part Zero) and Incremental (from current position) referencing.

Part Zero Definition

Section 2 - CNC Console and Software Basics

Keypad Functions

Text Editing Operations

Section 3 - Manual Operation and Machine Setup

Machine Power and Safety Procedures

Covers powering on/off, E-STOP functionality, and servo activation/resetting.

Manual Mode Settings

Explains mode settings like Absolute/Incremental and Inch/MM for operation.

Manual Mode Operations

Covers feedrate/rapid speed adjustments, jog modes, MDI, and handwheel use.

Section 4 - G-Codes

Linear and Circular Interpolation

Feedrate and Speed Control

Explains G94, G95, G96, and G97 for setting feedrate and spindle speed.

Section 5 - Canned Cycles

Turning and Boring Cycles

Details Z-axis (G73, G76) and X-axis (G74, G77) cycles for material removal.

Threading Cycles

Describes longitudinal (G83, G84), radial (G85, G86), tapping (G87), and boring (G88) cycles.

Section 6 - Program Editor

Editing Program Blocks

Section 9 - Tool Page and Tool Management

Tool-Length Offsets

Explains setting and using TLOs for tool positioning and part zero reference.

Tool Nose Radius Compensation

Covers G40, G41, G42 for compensating tool path based on nose radius.

Section 10 - Program Management

Deleting and Restoring Programs

Section 11 - Running Programs

Program Execution Modes

Teach Mode Operations

Section 14 - Shape Editor

Creating Shapes with Geometry Tools

Anilam 4200T Specifications

General

Control Type	CNC
Communication Ports	RS-232
I/O Options	Digital I/O
Memory	512KB
Resolution	0.0001 inch
Frequency	60 Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 60°C
Humidity	10-90% non-condensing