Standby mode:
To deactivate your device, press the Standby button (top right). You will hear a long
beep sound. The device’s red light will flash continuously and all the functions, except for
Turbo will be on.
Standby mode:
To activate the device, press the Standby button once. You will hear a shorter beep
sound and the device will begin working as set by the user.
The Standby mode is helpful for switch off the device when you want to use your yard
without setting off the alarm or harassment sound or let your pet into the yard without
having to unplug the device. When finished you can simply turn off the standby mode with
the remote control. You will hear a beep and the flashing LED light will turn off.
Strobe light button:
This button (bottom right) activates the Strobe Light function.
Press the button once. A light will me on to tell you that the device has been activated. It
will stay on for about 20 seconds. The Strobe Light is effective against birds and pests that
are active at night like squirrels, mice, rat, skunks, cats and dogs. The Strobe Light only
functions at night or in dark places.
Ultrasonic:
The Ultrasonic button (bottom left) turns on the high frequency sound that effectively
repels pest from your yard or other open area . Press the button once to activate. A light
will come on the sound will be activated for about 20 seconds.
To Next Page
Loading...