6
Note: When turning on the speaker, it will automatically connect to
the last-connected device (Bluetooth function needs to be enabled).
When pairing with an additional device, disable the Bluetooth
function on the previous device, the speaker will automatically return
to pairing mode. Then, repeat the pairing process.
How to Recharge
When the speaker’s battery is low, the speaker will announce “Battery
low”, and the red battery indicator will flash for about 10 minutes.
1. Plug the Micro USB cable into the speaker’s Micro USB charging port.
2. Insert the remaining end of the USB power wire into (a) a USB AC
adapter (not included) connected to a wall socket, or (b) a charging
computer USB port. A steady red battery indicator will show that it is
charging.
3. The red battery indicator will go off when the speaker is fully
charged.
To Next Page
Loading...
