05 06
Step 5
1. User can hang Floodlight Camera upside down or install it vertically on the
wall. Select the installation method that best suits the position of your
junction box.
Wall Mount
Eave Mount
To avoid risk of shock, injury or death, always be cautious when
working with electricity. Remember, do hire a professional
electrician if you’re uncomfortable working with electrical wiring.
Step 3
Shut down the circuit breaker in your house. Switch on/off the lights to make
sure the electricity in your house is properly shut off.
To avoid risk of shock, injury or death, always be cautious when
working with electricity.
Step 4
Remove the old Floodlight from the junction box and install the mounting
plate to the junction box.
The junction box and existing electrical wires are required to
Floodlight Camera installation.
The concaved side of the mounting plate must face outwards.
To Next Page
Loading...
