To Next PageTo Next Page
Need help?Do you have a question about the Anker eufy Security E340 and is the answer not in the manual?
General| Brand | Anker |
|---|---|
| Model | eufy Security E340 |
| Category | Security Camera |
| Language | English |
Initial step to disconnect power before proceeding with outdoor mounting.
Remove power cord; wire nuts will be used later for outdoor installation.
Turn off house circuit breaker to ensure electricity is safely shut off.
Remove existing fixture and attach the new mounting plate to the junction box.
Choose between wall mount or eave mount based on junction box position.
Secure the Floodlight Camera to the junction box using the provided hook.
Join ground wires from junction box and camera using a wire nut.
Connect camera wires (white, black) to respective junction box wires using wire nuts.
Insert and tighten the central screw through the camera for secure mounting.
Use camera knobs to position the camera for the desired viewing angle.
Switch on the circuit breaker and verify the LED indicator status.
Details FCC rules, warnings, and compliance for radio frequency energy.
Information on RF exposure limits and required minimum distance from the body.
Instructions for proper disposal and recycling of the product.
Information on compliance with Canadian radio standards (CNR).
Details the 12-month limited warranty for the product.
Provides phone numbers and email for customer support.
