Anker Nebula Mars 3 Quick Start Guide

● Slightly move the projector to enable
autofocus and auto keystone correction.
● Press to enable autofocus.
Slide the lens cover down to turn on the projector,
and slide up to turn it off.
2. Prepare the Remote Control
Before using for the first time, fully charge the
built-in battery using the provided adapter.The LED
screen will light up when the battery is charged.
Power On
Autofocus and Auto
Keystone Correction
Basic Setup
For first-time use, follow the on-screen
instructions to complete the basic setup. Adjust
settings in the projector's Settings menu if
necessary.
Connect to an HDMI playback device such as a TV
box, TV stick, DVD player, set-top box (STB), or
games console.
Connect to external sound output devices
including headphones and speakers.
Connect to a USB-A or USB-C drive to enjoy
stored music, video, and pictures.
Wirelessly cast movies, games, and music from
your phone to Nebula Mars 3.
Play a video clip on your phone and tap the
cast icon on the video screen.
Select the device D2333. The projector will
mirror the screen of the connected phone.
1
2
T
Make sure Nebula Mars 3
and your phone are
connected to the same
wireless network.
3. Play Through External
Sound Devices
4. Play from a USB Drive
Charge Your Projector
1. Front View 1. Overview
2. Rear View
3. Top View
4. Bottom View
Remote Control
1. Screen Mirroring
2. Play from HDMI Playback Devices
Use as a Projector
To replace the batteries, slide open the
battery compartment, insert new batteries
(matching the polarity (+/-) as indicated),
and close the battery
compartment.
2
Before using for the first time, slide to open
the battery compartment, and install two AAA
batteries.
Return to the
previous menu
Power on / off
Access more
options
Access the
home menu
Volume up / down
Adjust focus
Press to activate
Google Assistant
Navigation
Confirm a
selection /
pause / resume
Remote Control: Nebula RC
Model: D0413X
At a Glance
Return button
DC IN port
Ambient light
Adjustable stand
Air ventilation (inlet)
+
+
Nebula Mars 3
Quick Start Guide
(not included)
(not included)
USB-C
USB-A
DC IN
Handle
Lens
Lens cover
Loudspeaker
LED screen
Power mode button
Reset button
Ambient light button
AUX-OUT socket
HDMI port
Air ventilation (outlet)
USB-C port
USB-A port
OFF ON
Navigation /
confirmation button
Volume up /
down buttons
Bluetooth speaker
button
5 6 7 84321
Sensors (for
autofocus and
auto keystone
correction)

Anker Nebula Mars 3 Specifications

General

Throw Ratio	1.2:1
Projection Technology	DLP
Light Source	LED
Built-in Speaker	Yes
Resolution	1920x1080 (Full HD)
Operating System	Android TV 11
Connectivity	Wi-Fi, Bluetooth
HDR	HDR10
Contrast Ratio	1000:1
Ports	HDMI, USB