EasyManua.ls Logo

Anker PowerHouse 521 - Flashlight and SOS Mode; Product Specifications; Frequently Asked Questions; Important Safety Instructions

Anker PowerHouse 521
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
0605
Flashlight Mode
Press the button once to turn on the ambient light.
2S
SOS
x1
Hold the button for 2 seconds to turn on SOS mode.
2S
SOS
x1
FAQ
Q1: What's the max power output of the AC port?
200W, and if you use the AC port for devices greater than 200W, the product will automatically turn off.
Q2: Can I recharge the product while charging connected devices?
Yes.
Q3: Can this product power a CPAP?
Yes, but do not forget to turn off the Power Saving Mode first.
Q4: Will this product lose power automatically if not powered off?
Yes, when the car socket or AC control button is turned on, even if no devices are being charged, there will still be a
certain amount of no-load power consumption. To avoid draining the battery, we recommend keeping Power Saving
Mode turned on except when you are charging low-powered devices like CPAP machines and cameras.
Q5: What kind of solar charger can charge this product?
Any 12V-28V solar charger with a DC 8mm
DC 7909
male connector.
Specifications
Cell Capacity 256 Wh
DC Input 11-28V
5.5A (65W Max)
Car Charger Output 12V
10A
AC Output 110V~ 1.82A, 50Hz/60Hz, 200W
USB-A Output 5V
3.6A (2.4A Max Per Port)
USB-C Input 5V
3A/ 9V
3A/ 15V 3A/20V
3A (60W Max)
USB-C Output 5V
3A/ 9V
3A/ 15V
3A/20V
3A (60W Max)
Operating Temperature 32°F-104°F / 0°C-40°C
Ambient Temperature 32°F-104°F / 0°C-40°C
Size 21.6*21.14*14.4cm/ 8.5*8.32*5.67inches
Net Weight 3.7kg/8.16lbs
Gross Weight 4.34kg/9.57lbs
Attention
Not permitted on aircraft.
IMPORTANT SAFETY INSTRUCTIONS
WARNING - When using this product, basic precautions should always be followed, including the following:
Read all the instructions before using the product.
To reduce the risk of injury, close supervision is necessary when the product is used near children.
Do not put fingers or hands into the product.
Do not expose the product to rain or snow.
Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire
or injury to persons.
To reduce risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the
product.
Do not use the product in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury to
persons.
Do not use the product that is damaged or modified. Damaged or modified batteries may exhibit unpredictable
behavior resulting in fire, explosion or risk of injury.
Do not operate the product with a damaged cord or plug, or a damaged output cable.
Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect
reassembly may result in a risk of fire or electric shock.
Do not expose to fire or high temperatures. Exposure to fire or temperatures above 130°C may cause explosion.
To reduce the risk of electric shock, unplug the power pack form the outlet before attempting any instructed
servicing.
Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that
the safety of the product is maintained.
When charging a device, the product may feel warm, this is a normal operating condition and should not be cause

Related product manuals