*The handle attachments can also be used for Anker SOLIX adjustable straps (sold separately).
Recharge Your Power Station
Solar Panel Recharging (100W Max)
Recharge your power station with a maximum solar input of 100W by connecting up to one Anker 100W / 60W Solar Panel
as shown in the figure with a solar charging cable*.
*The solar charging cable is sold separately.
*Only use 11V-28V solar panels with an XT60 connector. Incompatible with Anker
SOLIX PS30 (or other 5V~3A USB-C panels), PS200, and PS400. Using incompatible
panels will damage the power station and will not be covered under warranty.
To Next Page
Loading...
