Powering Your Device
Power On/O
Press the main power button for 3 seconds to turn your power station on or o.
When the "Remaining Battery" indicator shows on the LCD screen, your power station is ready to charge devices.
• When powered on, press the main power button to turn the screen on or o.
• The screen will automatically turn o after 30 seconds of lighting up. The auto-o time can be set in the Anker
app.
• The power station will power o automatically if the output buttons are turned o and no power loads are
detected for 2 hours. The standby duration can be set in the Anker app. We recommend not setting this to
"never," so that the product can shut down on its own and save power in a long-term unused state.
USB Charging
Connect your devices to the USB ports.
Note: The USB-C3 output ports are a PS3 classification. There is a risk of fire when connecting additional equipment to the
USB-C ports; safeguards against fire in the connected equipment or accessories should be considered. Only connect your
portable power station to equipment or accessories that comply with clauses 6.3, 6.4 and 6.5 of IEC/EN IEC/BS EN IEC
62368-1 standards. Additionally, use a USB-C 5A cable to achieve maximum power (20VDC/5A, 100W; 28VDC/5A, 140W).
To Next Page
Loading...
