Press Enter pairing mode
Press and hold
for 2 seconds
Un-pair connected device and
re-enter pairing mode
Flashing blue Pairing mode
Steady blue Connected to a device
When turned on, SoundCore will automatically
connect to the last connected device if available.
If not, SoundCore will enter pairing mode.
NFC Pairing Connect via AUX
NFC
ON
2
1
NFC
To break connection, tap again the
NFC device onto SoundCore’s NFC
detection area.
* SoundLine AUX cable sold separately
To return to Bluetooth mode, remove the
AUX cable from your SoundCore.
To Next Page
Loading...
