EN
06
Transmit Mode (TX)
To enter Transmit mode, turn the TX/RX switch to the TX position.
Connect Soundsync to a non-Bluetooth multimedia device (such as TV,
PC) via a 3.5mm audio cable or an optical cable. The audio source from
the device can be transmitted to a Bluetooth headphone or speaker via
Soundsync.
AUX / SPDIF IN
TX Mode
TV
1
2
x 2
Press twice
Enter/Exit Bluetooth pairing mode
Rapidly flashing
blue
Slowly flashing blue
Connected to one device (TX
mode)
Steady green Connected to two devices
To Next Page
Loading...
