anko KB-932E3 - Before First Use; Initial Preparation Steps; Operation; Filling Tank and Steam Ironing

BEFORE FIRST USE
Unpack the appliance and check if all parts are there
and undamaged. Should this not be the case, return the
product to Kmart for replacement.
The packaging contains:
 One steam iron
 One filler cup
Clean all parts before first use. See Cleaning and
Maintenance
Heat up the iron to its maximum temperature and iron
over a piece of damp cloth for several minutes. This will
burn-off any manufacturing residue from the iron.
Smoke and odour may occur for a short period during
this process, which is normal.
FEATURES
Your iron has an Anti-Drip system, Anti-Scales system
and Auto-Off function.
Anti-Drip system: This is to prevent water from escaping
from the soleplate when the iron is cold. During use, the
anti-drip system may emit a loud ‘clicking’ sound,
particularly when heating up or cooling down. This is
normal and indicates that the system is functioning
correctly.
Anti-Scale system: The built-in anti-scale cartridge is
designed to reduce the build-up of lime scale which
occurs during steam ironing and will prolong the
working life of your iron. The anti-calc cartridge is an
integral part of the water tank and does not need to be
replaced.
Auto-Off function: This feature automatically switches
off the steam iron if it has not been moved for a while.
PARTS
A
Soleplate
E
Spray button
B
Spray nozzle
F
Steam shot button
C
Water filling inlet
G
Cord bushing
D
Variable steam
switch
H
Indicator lamp
I
Temperature dial
OPERATION
Filling the water tank
 Ensure that the iron is cold and not connected to a
power supply.
 Open the water filling cover (C). Hold the iron in a
tilted position and fill the tank with plain water,
using the filler cup.
 DO NOT exceed the max level on the tank.
 Close the water filling cover (C) by pressing down the
cap until you hear a ‘click’. To avoid water spillage,
ensure that the water tank is properly closed.
NOTES:
To avoid calcium deposits, we recommend you use
distilled water for your steam iron.
To avoid damage or blockage of your steam iron, do not
use any scented water or additives.
Steam Ironing
Your steam iron is equipped with the Eco Steam System.
This function offers 3 steam levels for optimal ironing:
ECO: Reduced amount of steam for energy saving,
suitable for most fabric types
Normal steam : suitable for most fabric types
Power steam : increased steam output for remove
stubborn creases
 Fill the water tank with plain water.
 Position the iron vertically on its stand on a suitable
flat stable surface.