The Anko Cosmetics Cooler, model MFP-5L, is a compact, thermo-electric Peltier module-based appliance designed for both cooling and heating cosmetics. It is intended for household use and similar applications, such as staff kitchen areas, farmhouses, hotels, motels, bed and breakfast environments, and catering, but not for commercial or industrial use. The device is specifically designed for use in tropical climates, as indicated by the "T" mark on its rating label.
Function Description:
The primary function of the Anko Cosmetics Cooler is to provide a controlled temperature environment for cosmetics, either cooling them to help prevent liquids and gels from drying out or thickening, or heating them for specific applications. Unlike traditional refrigerators, it does not use a compressor, relying instead on a thermo-electric Peltier module for both cooling and heating. This design contributes to its near-silent operation.
Important Technical Specifications:
- Model Number: MFP-5L
- Cooling/Heating Mechanism: Thermo-electric Peltier module (no compressor for cooling, no heating elements for heating).
- Capacity: 5L (implied by model number, though not explicitly stated as volume in the provided text, it is a common designation for mini-fridges).
- Power Source: Operates from a power source of the same voltage, frequency, and rating as indicated on the product identification plate (220-240V, as seen in the diagram).
- Inner Door Pocket Max Storage Weight: 150g.
- Climate Suitability: Designed for tropical climates ("T" mark).
- Dimensions: Compact size (specific dimensions not provided).
Usage Features:
- Easy Operation: The device is designed for straightforward use.
- ON/OFF Selector Switch: Located at the back of the appliance, this switch controls the power to the unit.
- Cooling Function:
- To activate, slide the selector switch to the "Cool" position.
- A green indicator light will illuminate, signifying that the appliance is cooling.
- Storing cosmetics at cooler temperatures can help preserve their consistency and ease of application.
- Suitable cosmetics for cooling include nail polish and removers, perfumes, lipsticks, lip balms, face misters, applicators, eye creams and serums, face creams, pencils (eyeliner), and organic cosmetics.
- It is important not to crowd items inside to allow for effective air circulation and cooling.
- Important Note: Do not place food or drink items inside this appliance when using the cooling function.
- Switching from Heat to Cool requires the appliance to cool down naturally in ambient room temperature for at least 30 minutes with the door open.
- Heating Function:
- To activate, slide the selector switch to the "Heat" position.
- A red indicator light will illuminate, signifying that the appliance is heating.
- This function can be used to heat products for easier application.
- Examples of items that can be heated include hair removal wax or wax strips, oils, and facial cloths.
- Similar to cooling, do not crowd items to ensure proper air circulation.
- Important Note: Do not place food or drink items inside this appliance when using the heating function.
- Caution: When using the heating function, internal surface temperatures can become hot enough to burn skin. Exercise care.
- Switching from Cool to Heat requires the appliance to warm up naturally in ambient room temperature for at least 30 minutes with the door open.
- Temperature Transition: When switching between cooling and heating modes, it is crucial to allow the appliance to naturally adjust to ambient room temperature for at least 30 minutes with the door open. Failure to do so could potentially damage the appliance.
- Temperature Attainment: Depending on ambient temperature and contents, it may take several hours to reach the desired cooling or heating temperature.
- Internal Storage: Includes an inner door pocket and an inner shelf for organizing cosmetics.
- Portability: Features a carry handle recess for easy movement. The unit should be moved slowly and carefully after being turned off and unplugged.
Maintenance Features:
- Cleaning:
- Always unplug the appliance from the mains power before cleaning.
- Turn off and unplug the unit prior to cleaning.
- Wipe the unit over with a damp (not wet) cloth using fresh, clean, lukewarm water and mild detergent.
- Do not spray with liquids or submerge the unit in water or any other liquid.
- Do not use flammable liquids, chemicals, abrasive creams, steel wool, or scouring pads for cleaning.
- Wipe over again to remove any detergent residue and thoroughly dry prior to reusing.
- Ensure the power socket in the back is kept dry and not splashed.
- If the vent holes are dusty, use a vacuum cleaner with a "non-rotating" brush attachment to gently vacuum the dust away.
- Important: Do not poke any objects into the vent holes.
- Storage:
- Switch off and unplug the appliance from the mains power.
- Coil the power supply cord loosely and place it inside the appliance.
- Store the unit in a dry, well-ventilated area.
- If not using for a long time, turn off, unplug, and empty any water from the unit.
Safety Instructions Highlights:
- Read the instruction manual carefully before use.
- Keep out of reach of young children and supervise children to prevent play with the appliance or packaging materials.
- Do not disassemble the appliance; there are no user-serviceable parts.
- Do not store explosive substances inside.
- Ensure the supply cord is not trapped or damaged when positioning the appliance.
- Do not locate multiple portable socket-outlets or power supplies at the rear.
- Keep the appliance dry; do not use with wet hands or immerse in water.
- Operate only from the specified power source.
- Position the power lead properly to prevent tripping or pinching.
- Use only for its intended household purpose.
- Do not use if damaged; repairs must be performed by a qualified electrical person.
- Use only supplied accessories.
- Do not install on other appliances, uneven surfaces, or near heat sources, direct sunlight, excessive dust, or mechanical vibrations.
- Do not use outdoors or near hot gas/electrical burners or in a heated oven.
- Maintain at least 300mm clearance around all sides.
- Unplug during lightning storms or long periods of disuse.
- Do not block ventilation openings.
- Do not misuse the cord; pull the plug, not the cord, to disconnect.
- Do not insert foreign objects into grille openings.
- Ensure the unit is on a stable surface during operation.
- If using an extension cord, its technical specifications must meet or exceed the appliance's.
- Do not allow the extension cord to hang over edges or contact hot surfaces.
- Do not use if cords or plugs are worn or damaged.
Need help?
General
To Next Page